Why remove it? They make a neat littel device that bypasses the cat &
muffler. It shunts the exhaust into a second line that is WIDE open..... I
can't remember what they are called but they are cast iron and can be
welding inline after the header... it's cable operated from inside the
cab...
Preacher
http://fly.to/bastaards
----- Original Message -----
From: Ryan Groth <ryan_groth@yahoo.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, March 17, 1999 9:25 PM
Subject: DML: REcommended Exhaust Mods for 96v6-4x4
>I have a 96 v6 4x4. I would like to do some exhaust mods. In my state
>it is legal to remove the muffler. There are a fair number of
>1,000-2,000 foot hills around here, so it's rare to open it up on flat
>striaght highway. Most often times I am swapping between 4th and 5th
>to do 60-70 up hills (2k-3k rpm), but I do a fair amount of country
>roads at 30-40 swapping between 3rd and 4th (1.5k-2.5k rpm). What
>should I do. Straight pipe cat back 2.5?
>
>Sometime in the future I am going to replace the stock tires (P235s)
>with 31x9.5x13s if that makes any difference.
>
>
>Ryan
>
>
>_________________________________________________________
>DO YOU YAHOO!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:13 EDT