RE: Rocker Arms

From: Wisotzkey, Rich (Rich.Wisotzkey@gsc.gte.com)
Date: Sun Mar 21 1999 - 17:55:46 EST


Josh,
I know you specifically mentioned Crowers, but are you aware that
Competition Cams has a #1425 Magnum Rocker Kit available? It is a set of
1:7 roller rockers, .080 pushrods and guides. It does not include a new set
of springs. Last time I checked, Summit was selling it for $320.
Rich - Ashburn, VA

-----Original Message-----
From: William Blount Arthur [mailto:m990198@nadn.navy.mil]
Sent: Saturday, March 20, 1999 11:31 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Rocker Arms

I read in Mopar action that it is good for around 10 HP and helps the top
RPMS. If you do it, and change your pushrods too, you can take it to
5500, maybe 6000 rpm no problem. The pushrods are the weak link according
to Mopar Action. It is an expensive thing though, because you have to get
the ones made for a ford small block and then get the pedistol conversion
kit from crane. I think it is like 350 to 450 bucks to do it.
I am going to do it when I get a new cam, when I get money....

Bill
'97 SS/T

On Sat, 20 Mar 1999 BlKV8Dkota@aol.com wrote:

> Has anyone replaced their rocker arms with 1.7 roller rockers?
Specifically
> Crower's? Was it hard to replace them and did you notice a great deal of
gain
> performance wise?
>
> Josh
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:19 EDT