The connector on my 92 Dak 4x4 is on top of the tranny/transfer case...The
best way to get at it is to remove the 4x4 shift lever boota and bezel and
snake yer hand in that way...its tight, but then I got fat hands....
The wire on mine is JUST long enough to reach.....
Good luck!
At 07:40 PM 3/27/99 -0600, you wrote:
>There should be a connector a little way up the wire...
>
>
>----- Original Message -----
>From: <GrnDak4x4@aol.com>
>To: <dakota-truck@buffnet.net>
>Sent: Saturday, March 27, 1999 6:58 PM
>Subject: DML: Oxygen Sensor Wires/Connector
>
>
>> I was working on my truck today(for about 4 hours, but thats another
>story)
>> and decided to take a peek at the oxygen sensor since I plan on replacing
>it
>> with a new one sometime this week. I easily found the sensor tapped into
>the
>> exhaust pipe, but could not seem to trace where the wires went to or what
>they
>> connected to. How do I unplug the sensor once I have taken it out of the
>> exhaust pipe??
>> Help! Thanks!
>> Kyle
>> 93 Dakota 4x4 V6
>>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:23 EDT