Wires...Stay away from Jacobs Wires. (MSD Super-Conductor or MagnaCore work
best.)
For offroad use...MSD 6T...for normal use, MSD 6A.
>
> << I have a 99 4x4 CC with a v6 and wanted to add to it some MSD 8.5 wires
> with
> some high capacity spark plugs. I am mainly looking for the best fuel
> efficient/power combo.
>
> Can anyone recommend what plugs I should go with, the gapping, and
anything
> special I should know about the wires as far as arcing is concerned?
>
> I'm also looking at a K&M air filter setup and was wondering what people
> recommend as the best power/fuel combo?
> >>
>
> If you wnat some ignition mods, definately get some MSD 8.5MM Super
Conductor
> wires. I did for my V6, just used the ones meant for a 94-97 318 Ram, and
> have 2 left over. These are great wires! I also am running an Accel Super
> Coil, 42,000 volts. Maybe try out a brass cap and rotor, mine is made by
Borg
> Warner Select. My plugs a Champion Truck Plugs. I would also highly
suggest
> the MSD 6A ignition box......as I will buy one soon.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:41 EDT