In a message dated 99-04-12 17:35:19 EDT, you write:
<< In the 1994 model year, Dodge changed the fuel setup. No longer is
there a fuel pressure regulator with a return line back to the tank.
Its all done by the computer now. As a part of the change, the fuel
filter/screen was moved to the inside of the gas tank. I haven't had
to change mine yet, but its supposed to be a big hassle. I've heard
from several sources that its much easier to pull the bed off the
truck than to drop the tank.
>>
Jon,
It's really not hard at all to pull the tank. I have dropped my tank 2 times
now to replace the fuel pump assembly. I would highly suggest to get another
person to help you, along with a jack. All that is really holding the tank up
is 2 steel straps bolted to the bed, which only take 10 minutes to tak those
off. I would say after pulling the gas filler neck and vent line off, all
that is left is the 2 gas lines, vent line, and electrical connector. All in
all, dropping the tank really only took me this last time about 25 minutes
total. I do suggest to spray penetrant lube on those tank strap bolts!
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:42 EDT