No bucks, I plan to make the info free to anyone who dares to do it, AT YOUR
OWN RISK!
Mark
-----Original Message-----
From: The Man From Utopia <tmfu@home.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, April 14, 1999 8:14 PM
Subject: RE: DML: Adapting MP SBEC
>Hope you guys realize that if successful you stand to make some bucks.....
>
>Greg
>95 DSCC v6 5spd
>
>> -----Original Message-----
>> From: owner-dakota-truck@buffnet4.buffnet.net
>> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Bob Tom
>> Sent: Wednesday, April 14, 1999 11:32 AM
>> To: dakota-truck@buffnet.net
>> Subject: Re: DML: Adapting MP SBEC
>>
>>
>> On Apr. 14, Ted wrote:
>> >I am an electronics technician and the guy running
>> >the 96 SBEC in his 97 made me think that if the gauge
>> >outputs are present on the 96 SBEC, I could either
>> >build an adaptor cable or repin the present cable on my 97...
>>
>> Ted
>>
>> I'm the one running the 96 MP SBEC on my 97 ... I think
>> that there is someone else on the list doing the same.
>>
>> My son and I are still in the midst of collecting data for
>> the 96 and 97 and are looking into a solution along your
>> line of thinking.
>>
>> My son is coming over to my place some time today to
>> temporarily install an aftermarket tach into the 97.
>> Time permitting, I'll go over with him what we have and
>> see if the idea that he had is doable. BTW, both of us
>> are not electronics techicians ... just going by grunt
>> experience.
>>
>> Hopefully, I can pass the information that we have and
>> the possible fix to you by tonight.
>>
>> Your offer is much appreciated.
>>
>> Bob
>> Burlington, Ontario
>>
>> '97 CC Sport, 5.2L, 3.55, auto., 4x2
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:45 EDT