What cam did you use Bill? What are the specs, how did it work with the
stock computer? I was planning to do the Mopar cam, but I dont think it will
work with the stock computer.
Mark
-----Original Message-----
From: WillTier@aol.com <WillTier@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Monday, May 03, 1999 5:34 PM
Subject: Re: DML: Unexpected Track Result
>In a message dated 5/2/99 11:10:20 PM Eastern Daylight Time,
tigers@bserv.com
>writes:
>
><<
> Mike Leach headers arrived Friday noon and will be installing
> them tomorrow. Hope cam and rocker arms come in by Tuesday. >>
>
>Bob
>
>What Cam and rockers are you getting ? I went with a comp cam but it
turned
>into a real fiasco when I got it all apart and found the springs and
>retainers did not fit. I got the info direct from Comp and found out
another
>DMLer had been through the same ordeal previously. Apparently Comp doesn't
>learn from their mistakes. Anyway I have to use the Mopar springs and ect,
>which are on backorder. Yepper it was a real pleasant experience dealing
with
>Comp. Hope your going with someone else.
>
>Bill
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:57 EDT