When I took mine off I unbolted the skid plate from the transfer case and
put one of the 4 bolts that holds the blade onto the clutch assembly and
put that through the skid plate. It would hit against one of the other
bolts, and it's plenty big to let you hold it in place while you remove it.
David Henry '94 CC 4x4 318 5Spd in MI
> Date: Sat, 22 May 1999 21:37:30 -0400
> From: Bob H <torch@triplet.net>
> Subject: Re: DML: Re: The other Bob
>
> Wondered where you have been! Need your help, of course. To update you I
> have Leach ceramic headers on order and have also received my dual 12"
> Flex-a-lite fans. That is where the problem is. Alan S. sent me pics and
> description on how to put the fans on. I can not figure it out and can
not
> get the original fan off! It will not stay put to get off, the belt
turns.
> Can you look in the service manual and let me know how it says to get it
> off? I would appreciate it. I also picked up a 180 thermo and gasket to
do
> at the same time. I will report my results, of course. Getting 13.5 in
> town, got to get better. I have a G tech, which will tell me what gain I
> have after doing these mods. Send help this way!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:09 EDT