dodge radio wiring based on color:
http://www.autotoys.com/New_Tech/Wire_codes/Dodge_Wire_Colors/dodge_wire_col
ors.htm
hope it helps
At 07:09 PM 6/16/99 -0500, you wrote:
>I couldn't find the package the wiring harness kit came in. It has all the
>info on the different wires and what they are. I would suggest you go to
>Circuit City and buy the harness ($15) and get the info you need. You can
>always returned it (didn't work) and get your money back.
>
>GV 98 CC BL R/T
>
>
>-----Original Message-----
>From: brian.duffey@intelsat.int <brian.duffey@intelsat.int>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Wednesday, June 16, 1999 9:09 AM
>Subject: RE: DML: More Speaker Questions...
>
>
>>O.K., its gotten so bad that I'm now responding to my own posts!
>>Actually, this is to expand on my question below about speaker wiring.
>>
>>I pulled my dash apart yesterday to check the wiring from the Radio to
>>speakers. Yes, I was crazy enough to think that DC might have actually
>>labeled the wiring, NOT. But it was interesting to see that there are 13
>>wires connected to the two plugs on the radio (7 right-6 left.. I think)
>>Four speakers, 2 wires each = 8, 2 power leads (+,-) = 10....
>>
>>** So, can someone explain what the other three wires are? **
>>(Anyone with an FSM for the '95, are these listed?)
>>
>>(Not grnd strap or antenna, those are separate)
>>
>>Thanks for any assistance!
>>
>>Duff
>>'95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
>>MSD 6AL - MSD Blaster Coil - Rancho 5000/9000
>>MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
>>
>>
>>
>>
>>> -----Original Message-----
>>> From: brian.duffey@intelsat.int [mailto:brian.duffey@intelsat.int]
>>> Sent: Monday, June 14, 1999 12:10 PM
>>> To: dakota-truck@buffnet.net
>>> Subject: RE: DML: More Speaker Questions...
>>>
>>>
>>> All this is from looking at the speaker connection end, I
>>> haven't begun the
>>> head unit replacement yet, so tracing the wires from the back
>>> of that was
>>> not an option. Although, knowing how these thing usually go,
>>> its not too
>>> likely their will be alot of info at the back of the Radio/Cass.
>>>
>>> None of the wires were Red or Black (that would be too
>>> simple). I remember
>>> the Rt Frnt was a Blue with Red Stripe and a Purple, so I
>>> used the Blue/Red
>>> as the + lead. Rt. Rear, the wires had a yellow strip on one
>>> and a white
>>> stripe on the other (used the white as +). Can't recall what
>>> the left side
>>> wires were.
>>>
>>> Taking to a shop today to look at options for Head unit/CD,
>>> might just have
>>> to have them check the speakers if/when they install the other parts.
>>>
>>> Thanks,
>>> Duff
>>>
>>>
>>>
>>> > -----Original Message-----
>>> > From: Alberto Aguirre [mailto:bluedoberman@yahoo.com]
>>> > Sent: Monday, June 14, 1999 10:27 AM
>>> > To: dakota-truck@buffnet.net
>>> > Subject: Re: DML: More Speaker Questions...
>>> >
>>> >
>>> >
>>> > typically most color or marking codes that i have seen are
>>> standard.
>>> > there will either be a colored wire paired with a black which is
>>> > negative. Two wires of the same color but the one with a
>>> black stripe
>>> > is the negative and the other one sometimes has a white stripe. All
>>> > the speakers will have different colors to help differentiate in the
>>> > back of the stereo though. The typical colors are red:stereo
>>> > pwr,black:neg(ground),yellow:remote,blue:pwr antennae,orange:fuse
>>> > box,and color coded pairs for each speaker. Each pair having a wire
>>> > with a black stripe for the negative.
>>> > What exactly is it that you see?
>>> > --- brian.duffey@intelsat.int wrote:
>>> > >
>>> > >
>>> > > Wanted to ask this yesterday when I was installing
>>> > > my new speakers, but no
>>> > > DML access at home!
>>> > >
>>> > > Can anyone clearly identify for me the positive &
>>> > > negative leads for the
>>> > > standard factory stereo setup in our dakotas? ('95
>>> > > Club Cab with factory
>>> > > AM/FM/Cassette). I got my speakers installed, using
>>> > > the standard theory that
>>> > > the 'marked' wire is the positive (ie: solid wire &
>>> > > striped wire, then the
>>> > > striped wire is +). Unfortunately, the wires at each
>>> > > location are all
>>> > > different colors/markings, and some of them both
>>> > > have stripes?!?!
>>> > >
>>> > > I have all the speakers installed, but I want to go
>>> > > back and make sure I
>>> > > don't have the polarity crossed.
>>> > >
>>> > > Since there seems to be alot of audiophiles on the
>>> > > list, can anyone provide
>>> > > some insight?
>>> > >
>>> > > (oh yeah.. incase anyone cares, the speakers are
>>> > > Boston Acoustics RX67
>>> > > (frnt) and CX8's (rear).
>>> > >
>>> > > Thanks in advance...
>>> > >
>>> > > Duff
>>> > > '95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
>>> > > MSD 6AL - MSD Blaster Coil - Rancho 5000/9000
>>> > > MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >
>>> >
>>> > _________________________________________________________
>>> > Do You Yahoo!?
>>> > Get your free @yahoo.com address at http://mail.yahoo.com
>>> >
>>>
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:25 EDT