RE: DML how to remove stage 2 chip?!?!?

From: Ryan T. Grimes (rugbynut@mpdr0.chicago.il.ameritech.net)
Date: Tue Jun 22 1999 - 07:40:33 EDT


Thanks guys. I didn't really want to take it out anyways. The truck
drives nicer with it in. I guess I should read a little more closely next
time.

>The Jet Stage-2 Chip is NOT emissions legal. Granted it doesn't constitute
>voiding the warranty, but in CA (and some of the other states) you'd fail
>the visual.
>
>
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet4.buffnet.net
>[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
>Dester243@aol.com
>Sent: Tuesday, June 22, 1999 12:08 AM
>To: dakota-truck@buffnet.net
>Subject: Re: DML: DML how to remove stage 2 chip?!?!?
>
>
>I'd like to know who the hell told u that it voids warranty. I have the
>paper RIGHT here. this is what it says:
>
>The product for which this document was issued is emission-sensitive and is
>subject to vertain federal and state regulations; the manufacturer has
>assigned an identification color code designation its intended use.
><code GREEN (1)>
>
>The product accompanying this document has been gauranteed a California Air
>Resources Board (ARB) exemption, an "EO" number, or is a direct or
>consolidated replacement part. It is 50-state legal, per the manufacturer's
>application guide
>
><BACK SIDE>
>The installation and use of this product does NOT void the new-vehicle
>warranty or should it be cause for the vehicle to fail an emissions test.
>Notify the product manufacturer if either of these situations occur. If you
>are unable to adequately resole either situation with the vehicle
>manufacturer, you may contact the EPA at 202-233-9040. If the vehicle
>manufacturer fails to honor emission-warranty claims, or the Federal Trade
>Commission (FTC) at 202-326-3128, if the federal protection is denied.
>
>hehe. have fun reading
>-Dester (YES! i'm very bored)
>
>> Okay guys, I need some help quickly. I have to remove my Jet Chip(voids
>> warranty?!?!?!) before I bring my dak to the dealer Tuesday night for
>> transmission problems. I tried to remove it but the clips are tough and
>I
>> didn't want to break them off. I know people have removed them, how do I
>> do it?(I'm a kinda-newbie). Thanks in advance.
>> Ryan T. Grimes
>> Rugby-[CMG]
>> Clan Mac Gaming

Ryan T. Grimes
Rugby-[CMG]
Clan Mac Gaming



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:27 EDT