At 11:21 PM 6/22/99 -0700, you wrote:
>
>I was taking a look around the motor today, took the
>PCV hose off at the manifold end... oil everywhere.
>My question is, will I screw anything up (other than
>possibly emissions) if I replace the PCV valve with an
>open breather element?
>
Jon
I've seen posts where some have replaced with an open breather.
I've not seen any reports of problems being caused by this.
BTW, I've seen the "14x3 FABM & SBBS" in your signature line.
If you don't mind, what does the SBBS stand for?
Bob
Burlington, Ontario
'97 CC Sport, 5.2L, 3.55, auto., 4x2, flame red
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:28 EDT