Oil everywhere inside the intake, what little I could
see through the nipple where the PCV hose attaches.
I'm going to remove that and the breather element and
replace them both with open element breathers, just to
keep hot oil out of the intake
--- BoogYT1300@aol.com wrote:
> In a message dated 6/23/99 1:24:59 AM EST,
> jdsmith4@yahoo.com writes:
>
> >
> > I was taking a look around the motor today, took
> the
> > PCV hose off at the manifold end... oil
> everywhere.
> > My question is, will I screw anything up (other
> than
> > possibly emissions) if I replace the PCV valve
> with an
> > open breather element?
> >
> It shouldnt hurt anything except emissions. Whaddya
> mean by oil everywhere??
> Was the engine running?
> Boog
>
===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:28 EDT