RE: 318 vs. 360 TB

From: Wisotzkey, Rich (Rich.Wisotzkey@gsc.gte.com)
Date: Wed Jun 23 1999 - 11:07:09 EDT


I don't think the heads are the same. The valves are larger in the 360 than
the 318. Is this not true?
Rich - Ashburn, VA

-----Original Message-----
From: Jon Smith [mailto:jdsmith4@yahoo.com]
Sent: Wednesday, June 23, 1999 10:44 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: 318 vs. 360 TB

Gordon, they are the same, as are the heads.

--- Gordon Adams <rtgordon@hotmail.com> wrote:
> Does anyone know if there is any difference in bore
> size of the stock 360
> throttle body and the stock 318 ?? (ie if you put a
> stock 360 TB on a 318
> would there be any difference??)
>
> thanks
> gordon
>
>
>
_______________________________________________________________
> Get Free Email and Do More On The Web. Visit
> http://www.msn.com
>

===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back
glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank
pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:28 EDT