My '93 is like that, much like my '85 Z28 8-). Just push the "D" shaped
plug in and it will loosen the cable. The rest of the procedure is the
same..
mike
In message <19990624193128.18202.rocketmail@web607.mail.yahoo.com>,Jon Smith wr
ites:
>
>Went out to adjust my TV cable today, it appears that
>the '95 cable is different from the '99 model. There
>is no white clip. There appears to be a plug of sorts
>(shaped not to different from the white clip on '99s)
>on the outboard side of the TV cable just behind the
>mounting bracket. Any OBD I's tried this trick?
>
>
>===
>Jon Smith -- Raleigh, NC
>'95 CC SLT 4x4 318 auto (15.653@89.12)
>MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspa
>cks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Ha
>yden 16" elec. fan
>http://come.to/killbilly
>ICQ # 9720504
>IM: Fast4x4
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:29 EDT