Re: Re: I must be getting old

From: Bob King (k85go76@erols.com)
Date: Sun Jun 27 1999 - 14:11:26 EDT


Well...cheap they're not. I believe they were about $100 for each tip
 they are stainless though).
Perhaps another resonator tip would do the job cheaper. But these were
advertised as mufflers in themselves. They could be used as your sole means
of noise suppression ...don't know what they'd sound like used by themselves
though. See http://www.powertone.com/
Bob
-----Original Message-----
From: KURTZ ERIC <erics5.9@home.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Sunday, June 27, 1999 1:33 PM
Subject: Re: DML: Re: I must be getting old

>really Bob, those tips helped out huh! Hm, maybe that would be a
>cheaper way to go
>Eric
>
>Bob King wrote:
>>
>> I have the MP 3" Cat Back and it was awful "boomy" too. Put two
"universal"
>> sized PowerTone Muffler tips (connected to a "Y" piece) . They did a
great
>> job of smoothing out the roar and no noticable changes in performance.
>> Sounds just like stock (EXCEPT A LITTLE DEEPER) up to 70 mph, then the
>> sound builds as expected above that.
>> Bob
>> Pennsville,NJ
>> -----Original Message-----
>> From: KURTZ ERIC <erics5.9@home.com>
>> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>> Date: Saturday, June 26, 1999 9:21 AM
>> Subject: DML: I must be getting old
>>
>> >
>> >
>> >Cause this new exhaust is too loud! Its kind of a generic muffler, get
>> >whatcha pay for? But man, I guess a straight 3" is a wee bit louder
>> >than true duels. It sounds great, but when I step into it, it just
>> >roars. Its great for performance. I have a lot more top end. Back
>> >pressure is off compared to the last exhaust so I can rev higher easier
>> >but I lose a little at the get go which is fine! I have to hold back
>> >from breakin' 'em loose anyway! I'm thinking that I might get a 3"
>> >straight through glass pack to pop on there to deaden it a bit. =0) Im
>> >getting old! My dad is laughing at me now!
>> >Eric
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:30 EDT