Remember this is for pre 97's. 97's up use a 29 spline gear and not 27.
Todd
www.netunlimited.net/~mustang/
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, June 29, 1999 11:07 AM
Subject: Re[2]: DML: limitied slip differential
>
>Here's the direct URL for anyone who wants to check it out:
>
>http://www.auburngear.com/402.htm
>
>
>At 09:32 AM 06/29/1999 -0500, you wrote:
>>9.25"...You mean 8.25" right? If so, Auburn Gear makes a LSD unit that's
>>far superior to our OEM units. http://www.auburngear.com
>>
>>
>>At 09:15 AM 06/29/1999 -0400, you wrote:
>>>PowerTrax was supposed to have a locker for our trucks hit the shelf this
>>>month... I haven't heard anything yet. But when it's out, I'm gonna' go
>>that
>>>route.
>>>Tom
>>>
>>>______________________________ Reply Separator
>>>_________________________________
>>>Subject: Re: DML: limitied slip differential
>>>Author: <dakota-truck@buffnet.net> at smtpout
>>>Date: 6/29/99 7:21 AM
>>>
>>>
>>>it's a 99 with the 9.25" rear end and 3.55 gears. I believe I have
someone
>>>who will do it for next to nothing, I just need to know what parts are
best
>>>and which ones I need. I've been hearing all this stuff about lockers,
that
>>>a way to go? All I know is traction is killing me and I've put this off
too
>>>long.
>>>
>>>
>>>
>>>----- Original Message -----
>>>From: Jon Smith <jdsmith4@yahoo.com>
>>>To: <dakota-truck@buffnet.net>
>>>Sent: Tuesday, June 29, 1999 12:15 AM
>>>Subject: Re: DML: limitied slip differential
>>>
>>>
>>>>
>>>> Yeah, find a hippie and get a hit from him :)
>>>>
>>>> Not really a cheap way to do it, except as a factory
>>>> option. Parts aren't that bad, but labor is usually
>>>> in the $500-600 range.
>>>>
>>>>
>>>>
>>>>
>>>> --- Aaron <acolona@i-55.com> wrote:
>>>> > Anyone know of the cheapest way to put a LSD in my
>>>> > truck.
>>>> >
>>>> >
>>>>
>>>> ===
>>>> Jon Smith -- Raleigh, NC
>>>> '95 CC SLT 4x4 318 auto (15.653@89.12)
>>>> MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back
>>>glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive
crank
>>>pulley, Hayden 16" elec. fan
>>>> http://come.to/killbilly
>>>> ICQ # 9720504
>>>> IM: Fast4x4
>>>> _________________________________________________________
>>>> Do You Yahoo!?
>>>> Get your free @yahoo.com address at http://mail.yahoo.com
>>>>
>>>>
>>>
>>>
>>>
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:31 EDT