OK Tom...How much should I expect to dish out for the hood? I'd need to get
it painted Solar Yellow of course!
Kevin
99 V6 Dak CC w/AC
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Thomas
Vacchino
Sent: Sunday, July 04, 1999 8:07 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Ram Hoods?
Kevin,
I have a PROGLASS Hood on my DAK. It incorporates an airbox in the engine
compartment which an open air filter(I use an K&N 14") sits in on top of
your
TB.
The airbox seals up tight to the bottom of the hood, the faster you go,ya ya
ya!!!, the more air if "rammed" into your TB........and they look the
nuts!!!!
"psychonaut"
Kevin Hoegen wrote:
> Ok, Whats the hoopla over these vented hoods? They look awesome, and I
> imagine it provides more cool air in the engine compartment...but is there
> other hardware under the hood that works WITH these custom hoods?
>
> I'm curious because I don't want to spen $$ modifying my air-filtration
only
> to replace it if I go ahead with the custom hood.
>
> Thanx again DMLers
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:49 EDT