I got 255/60/15's on the factory rims now. and everything's fine.Thats Y I
asked about 275/60/15's.. Was thinking alittle bit bout putting 255/60/15's
on the front, and 275/60/15's on the back.(IMO this would allow for alittle
better traction, cuz the rear is so light, the weight transfer would be
different, causing better traction, yet I could be wrong).. Tire wear
differs from each Tire Brand. But my Ultra Cheapy Tires, (Kelly Charger
tires) were just fine.other then the zig zaging and other wheel spinning
that was done.
Mike
96' Dak Sport V8 Auto
----- Original Message -----
From: <durling@ibm.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, July 14, 1999 2:50 PM
Subject: Re: DML: Tire Sizes
> Just wondering, do you have the factory chrome wheels or aftermarket? Mine
has
> chromed wheels with a full center cap that covers the lugs. If you have
the
> 225/60/15's on them do you have any wear problems? Do they rub the inside
of
> the wheel well much? That is the size tire I want and for that size tire I
> don't really want to have to buy new wheels. As for your question...I have
a
> local tire store that is very good and the guy told me once that
275/60/15's
> would fit but you have to go to a 15x8 wheel and the offset would have to
be
> further out. Basically they would stick out of the wheel wells. I didn't
want
> to have my paint sandblasted ;).
>
> Jeff Durling
> '96 RC Sport - like yours!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:58 EDT