Re: driveshaft carrier bearing going out??

From: Michael Stepka (mstepka@genesisdj.com)
Date: Mon Jul 19 1999 - 22:35:50 EDT


I Don't know if mine is the same exact problem as that, but I experience the
same vibrating and rattling at low Rpms, and especially in overdrive, like
giving it a little gas, or going up a hill.. It shakes the whole truck
really bad, and then it makes a loud clicking, rattle sound which sounds
like it comes from the transmission. I took it to the dealer already once,
and they didn't fix it. I haven't had time with work and all to go, but
when I do go I will demand it should be fixed.

Michael Stepka
98 Sport CC 4x4 V6
with all the chrome accessories
http://www.genesisdj.com/truck.html

----- Original Message -----
From: mrdancer <mrdancer@camalott.com>
To: 'DML' <dakota-truck@buffnet.net>
Sent: Monday, July 19, 1999 8:32 PM
Subject: DML: driveshaft carrier bearing going out??

> Fellow Daksters,
> I was on my way home from work today and the truck started vibrating and
> rattling pretty bad. After some investigation, it appears that the
carrier
> bearing (or its housing) on the driveshaft is going south. There had been
> some vibration developing under there over last few thousand miles, but I
> had figured it was the heat shields around the exhaust coming loose over
> time (142k miles).
>
> I put the rear of the truck up on stands, started it up & put it in Drive.
> The driveshaft shakes pretty bad & shakes everything around it. After
> shutting it back down, I checked it out and there's about 1/8" play in the
> rubber housing around the bearing. Under Drive stress, that's probably
> about 1/4" or more :(
>
> Apparently the rubber housing has deteriorated quite a bit. Has anybody
> else had this problem???
>
>
> '92 Dak CC 2wd 318 3.55
> '84 GoldWing Interstate
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:02 EDT