I don't know what the offset is but they have 5 1/2 in backspacing if that
helps. Do you think 3 in in the back would be too much if I left the front
stock. I don't want the front higher than the rear.
Mark
-----Original Message-----
From: Patrick Delgado <dadoctah@vitelcom.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, July 27, 1999 4:28 PM
Subject: Re: DML: want to lower my dak.
>Mark,
>In the front you can use Reg cab springs to -1". In the rear, shackle
mounts
>can get you 2". If your tires will fit or not depends on your wheels'
>offset.
>Dr. Pat
>
>----------
>>From: Terri Pryer <dzoo@arn.net>
>>To: dakota-truck@buffnet.net
>>Subject: DML: want to lower my dak.
>>Date: Mon, Jul 26, 1999, 11:03 PM
>>
>
>> Hi all,
>> I want to repost this because I didn't get any replies and am curious.
>> I want to lower my truck a bit. Not too much just 1/2... but I am not
sure
>> if I can because of the tires I have. I have been told that I can't
because
>> I am running 275's all around. anyone?
>> Thanx,
>> Mark
>> 91 cc 5spd 6er**
>>
>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:17 EDT