May have been mistaken here...I thought the Mopar Performance pulleys were
underdrive pulleys. Anyway, the pulley I installed on my Dak is an ASP pulley.
At 09:22 AM 08/03/1999 -0600, you wrote:
>Are we talking about Mopar pulleys or another brand. Last I
>checked, Mopar had a set of lightweight billet pulleys, but they
>were the same size as stock, just lighter. If they have an
>underdrive set, does anyone know the part number?
>
>Ryan K
>'99 R/T RC
>
>"Bernd D. Ratsch" wrote:
> >
> > Ed,
> >
> > All I did was install the crank pulley on my V6 Dak. The only thing I
> > noticed was when the truck is at idle for more than 3 - 4 minutes (or rush
> > hour stop-and-go traffic), the Voltage gauge on the dash drops below 10,
> > This is with the electric fan ON and the A/C fans are on high. It's
> > slightly worse if you run the headlights though. Not a big problem and
> will
> > return to normal once you're above 1500RPM.
> >
> > Bernd D. Ratsch
> > Pflugerville, TX
> > 1997 Dodge Dakota SLT/CC - 2WD
> > http://lonestar.texas.net/~bernd/Dakota.htm
> > bernd@texas.net
> >
> > Subject: DML: Mopar Performance Underdrive Pulleys
> >
> > hey all,
> > i havent installed my new MP pulleys yet, but i was wondering if anyone
> > else has them on their mag engine , and noticed any difference. I have
> > the 3 peice set and a 98 3.9 dak.
> >
> > Ed
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:38 EDT