ADVICE:(not related to question)
get the Accel coil adapter harness--p/n 14001ah from
summit. it costs about $18 dollars and you wouln't
have to cut your truck's stock harness
===
I tell you this,
no eternal reward
will forgive us now
for wasting the dawn!
--Jim Morrison
http://zeits.net/matt
http://darkharlequin.hypermart.net/
---"Bernd D. Ratsch" <bernd@texas.net> wrote:
>
> You can try .050" but with a stock coil, .045"
should be the max. (You can
> try the higher gap though)
>
> Bernd D. Ratsch
> Pflugerville, TX
> 1997 Dodge Dakota SLT/CC - 2WD
> http://lonestar.texas.net/~bernd/Dakota.htm
> bernd@texas.net
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On
Behalf Of
> Mst29@aol.com
> Sent: Tuesday, August 10, 1999 9:26 PM
> To: dakota-truck@buffnet.net
> Subject: DML: MSD IGNITION!!! SOME ADVICE PLEASE!!
>
>
> Im buying an MSD 6A ignition box. Just
the box, cause the box is
> what really makes the power. Also i only have 8,399
miles on my truck, and
> don't want to change my wires,plugs,and coil. When
you buy an Msd
> set(BOX,WIRES, COIL),they
> recommend you gap the plugs .50-.60 What if i
only buy the Box,should i
> still gaop the plug higher? or leave the gap stock?
What is the best gap
> when buying the set?
> SORRY FOR ALL THE QUESTIONS , BUT i WANT TO
KNOW BEFORE i BUY>
> THANKS!!!!!!!!!!
>
>
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:44 EDT