For wheelin' or 1/4 miles...YES. For fuel economy (if you care)...nope.
Bernd D. Ratsch
Pflugerville, TX
1997 Dodge Dakota SLT/CC - 2WD
http://lonestar.texas.net/~bernd/Dakota.htm
bernd@texas.net
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Aaron
Sent: Friday, August 13, 1999 6:56 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: going from 3.90 to 4.10 gears
what about 3.55's to 4.10's? worth it?
----- Original Message -----
From: KURTZ ERIC <erics5.9@home.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, August 13, 1999 6:30 PM
Subject: Re: DML: RE: going from 3.90 to 4.10 gears
> You will notice a slight difference, I made that change, but not a
> very big one. I wouldnt go back to 3.90 if I had to. I want realllllly
> bad the 4.30, but no one has em. Richmond stopped making them for
> 8.25's. Mancini had them listed on the net, but when I called them they
> didnt know much about it. He said it was something like an internet
> special!?!?
> Eric
>
> Kabuki2@aol.com wrote:
> >
> > In a message dated 8/12/99 10:59:33 PM Eastern Daylight Time,
> > TEDSDAKOTA@aol.com writes:
> >
> > << Hey Bernd, lift a tire, I can't just had major surgey. Is the
switch to
> > 4.10's worth it ??
> > Ted O,
> > >>
> >
> > going from 3.90 to 4.10 isn't going to provide much difference... try
going
> > to a 4.30 if you want to notice a difference... 4.56 would be better -
but I
> > would only advise that if you don't care about your fuel economy,
because
> > you'll probably be spinning some Rs just to cruise at 75mph with those
> > gears...
> >
> > imagine the nice holeshot though.... :-)
> >
> > ttyl
> > Patrick
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:48 EDT