In a message dated 8/14/99 1:15:49 PM Pacific Daylight Time, bernd@texas.net
writes:
> With some ingenuity and fabrication, anything is possible.
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Aaron
> Sent: Saturday, August 14, 1999 2:26 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: RE: going from 3.90 to 4.10 gears
>
>
> your scaring me, I was assuming that the one everyone was talking about a
> while back in summit will fit. They are supposed to have a 5-speed and a
> 6-speed? was I wrong?
>
> ----- Original Message -----
> From: KURTZ ERIC <erics5.9@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Saturday, August 14, 1999 3:30 AM
> Subject: Re: DML: RE: going from 3.90 to 4.10 gears
>
>
> > Im assuming that you found one that will bolt up to our magnums? Whats
> > the part number and cost, this sounds pretty interesting.
> > Eric
> >
> > Aaron wrote:
> > >
> > > I plan on putting in a borg warner six speed, so hopefully that will
> help.
> > >
> > > ----- Original Message -----
> > > From: Bernd D. Ratsch <bernd@texas.net>
> > > To: <dakota-truck@buffnet.net>
> > > Sent: Friday, August 13, 1999 9:53 PM
> > > Subject: RE: DML: RE: going from 3.90 to 4.10 gears
> > >
> > > > For wheelin' or 1/4 miles...YES. For fuel economy (if you
> care)...nope.
> > > >
> > > > Bernd D. Ratsch
> > > > Pflugerville, TX
> > > > 1997 Dodge Dakota SLT/CC - 2WD
> > > > http://lonestar.texas.net/~bernd/Dakota.htm
> > > > bernd@texas.net
> > > >
> > > > -----Original Message-----
> > > > From: owner-dakota-truck@buffnet4.buffnet.net
> > > > [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Aaron
> > > > Sent: Friday, August 13, 1999 6:56 PM
> > > > To: dakota-truck@buffnet.net
> > > > Subject: Re: DML: RE: going from 3.90 to 4.10 gears
> > > >
> > > >
> > > > what about 3.55's to 4.10's? worth it?
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: KURTZ ERIC <erics5.9@home.com>
> > > > To: <dakota-truck@buffnet.net>
> > > > Sent: Friday, August 13, 1999 6:30 PM
> > > > Subject: Re: DML: RE: going from 3.90 to 4.10 gears
> > > >
> > > >
> > > > > You will notice a slight difference, I made that change, but not
a
> > > > > very big one. I wouldnt go back to 3.90 if I had to. I want
> realllllly
> > > > > bad the 4.30, but no one has em. Richmond stopped making them for
> > > > > 8.25's. Mancini had them listed on the net, but when I called them
> they
> > > > > didnt know much about it. He said it was something like an
internet
> > > > > special!?!?
> > > > > Eric
> > > > >
> > > > > Kabuki2@aol.com w
What does this bullshit have to to with my original post
??????????????????????????????????????????????/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:48 EDT