Dester,
Indexing is where you use washers of varying thicknesses on each plug so
that the electrode of each plug is pointing in the same direction. I did
this on my 5.2L; all of the "gaps" face straight up where the injectors
spray down directly into the gap. It takes a little time to index all
the plugs since you may have to try several different washer
combinations to get the indexing correct on each plug.
Dester223@AOL.COM wrote:
>
> Indexing the plugs? how do you do that? what is that?
> -Dester
--
Brian D.
(_____
/ )
/_____/ *
/ ) (__ ___ (___
/ / / ) / / \ / )
(______/ / / (___/ \ / /
--------------------------------------------------------------
Deep Amethyst '99 Dakota CC SLT 4x4, 5.2L, 3.55, Auto., Loaded.
Mopar Chrome Side Steps & Chrome Grill Guard, Gibson Stainless
Steel Catback, Jacobs Pro-Street Energy Pak, Echlin Brass Cap
and Rotor, ExTang Soft Tonneau, K&N Generation II FIPK,
F&B Stage I TB (not installed yet), and still going...
Heart of Dixie! Alabama.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:49 EDT