i have (10 injectors...8 for the engine 2 auxilliary for the supercharger)
30lb injectors on my highly modified ram...it has approx 500hp... in my
opinion 30lb injectors are overkill on a medium modified ram or
dakota...unless you are going to run a high lift cam (above .520 lift),ported
heads and a 4 barrel throttle body 30lbers are just too much...even with 24
lb injectors you should(you dont have to) get a custom pcm reprogram, if you
dont you will run way too rich at idle,,foul out plugs and risk not passing
emmissions!!! heres a link to get that done..
http://www.maxrpm.com/
as far as i know i am the only person who has successfully run 30lb injectors
and the mopar performance 4 barrel throttle body..with a (custom)stock engine
management unit...i drive my truck daily (30-40 miles per day)
...i get 17mpg and run 12 sec 1/4 miles in racing trim (13's on the street)...
i attribute this to my custom program and a few tricks i pulled to get the
computer to think all is well... do yourself a favor get an air fuel ratio
gauge($140), remember any change you make will upset the whole balance of
your tuning,sometimes requiring a reprogram..if you arent running lean you
dont need bigger injectors... good luck!!!
Is anyone running 30lb injectors? If so, are you satisfied with them? Are
they to big for proper atomization? I am ready to purchase a set of 24's or
30's, and am looking for a little first hand feedback. They will be
augmenting a fair number of existing mods. Thanks.
Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:03 EDT