Re: gear lubes

From: Jon Smith (fast4x4@bellsouth.net)
Date: Thu Aug 26 1999 - 11:05:13 EDT


Transfer case is 2.5pints of ATF fluid, the rear diff is ~2quarts of gear
lube 75w90. Good time to go to synthetics, you may need friction modifyer
for the posi unit, depends on the fluid you put in it

_______________________________________
Jon Smith-------Raleigh,NC-------ICQ: 9720504
'95 318 auto CC 4x4 3.90 31" A/T's
JBA headers, dual glasspack, 14x3 FABM
F&B Stage I TB, MSD 8.5's, self-moded intake
MP SBEC, 180 degree thermo, ASP crank pulley,
16" Hayden elec. fan 0-60mph in 6.3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----- Original Message -----
From: dirt rider <drt-rdr@worldnet.att.net>
To: <dakota-truck@buffnet.net>
Sent: Thursday, August 26, 1999 10:15 AM
Subject: DML: gear lubes

> For the first time, I need to change the fluid in the rears and transfer
> case mainly cause the shop forgot to do it, but it a long story and my
truck
> will not be getting serviced at the dealer anymore. This stuff I can do
> myself.
> What kind of oil should I put in the transfer case and is it the same as
the
> rear and my rear is a posi, is there anything special about what I should
> put in that.
> Anyone know the capacities of the rear and transfer case so I buy enough
oil
>
> Thanks,
> Nick
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:03 EDT