Well I just bought brand new center line wheels and have had them on since
the beginning of summer and don't want to buy new ones just to lower it. I
kinda like the way the 275s look and think they would look killer on a
lowered dak. Now to save some money!!
Mark
-----Original Message-----
From: Dester223@aol.com <Dester223@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, August 31, 1999 9:27 PM
Subject: Re: DML: dropping the front
>which do you like more? with option 2. You just bought yourself a new set
>of tires. If you don't like em, buy some AR 767 ,36 dollar rims, and
mounts
>some low profile drags on there, for the track. or just pu the old set on
>those rims and bring those out to the track and hope that you don't spin
out
>bad...
>-Dester
>
>
><< Well I was going to have my front end lowered yesterday but now it looks
> like it might be a while before it gets done. The upper control arm has
> about 1/2 in or less between the tire and the edge. So I have two
> options...
> 1. Buy a new set of lower control arms that lower the spring pocket.
Thus
> when it is lowered the whole assembly moves.
> 2. Buy smaller tires and just buy the 1 in springs.
> Both are going to cost around the same but which is going to be safer and
or
> the better option?
> Mark
> 91 cc 5spd 6er
> >>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:30 EDT