Bernd,
They install on the front body mount and the rear mounts to the frame
right? Would you trust them to hold your truck up? I am considering them but
don't want looks, just protection.
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Thursday, September 02, 1999 6:28 PM
Subject: DML: RE: Re: Smittybilt Sure Steps
>Mine are "Genuine Steel" and only required slight drilling for the frame
>mounts on the rear of the bars. It only took about 15 minutes for the
>entire job.
>
>Bernd D. Ratsch
>Pflugerville, TX
>1997 Dodge Dakota SLT/CC - 2WD
>http://lonestar.texas.net/~bernd/Dakota.htm
>bernd@texas.net
>ICQ: 39320084
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet4.buffnet.net
>[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Preacher
>Sent: Thursday, September 02, 1999 4:58 PM
>To: dakota-truck@buffnet.net
>Subject: DML: Re: Smittybilt Sure Steps
>
>
>Mine are Smitty-built but I didn't install them..... If you want to take a
>look at them on the truck go to http://www.bastaards.org/dakota.htm
>
>Preacher
>
>Oh yeah... there are before and after pics of the bars... I had them
sprayed
>with Linex so if you like 'em shiney you are out of luck...LOL
>
>----- Original Message -----
>From: Tim Eickman <teickman@michaudcooley.com>
>To: <dakota-truck@buffnet.net>
>Sent: Thursday, September 02, 1999 11:27 AM
>Subject: DML: Smittybilt Sure Steps
>
>
>> Hi all,
>> Was thinking about putting some Smittybilt Sure steps on my
>> 99' 4x4 Dak. Anyone have these, and install them. The Summit
>> catalog says that there is possibly some drilling required. Is this
>> the case? I roamed thru some Dak owners websites, but couldn't
>> find anyone with them. Checked the archive but only found info on
>> the nerf bars. Thanks in advance...
>>
>> Tim Eickman
>> 99 CC 318 Auto 4X4 SLT+
>> Minneapolis, MN
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:31 EDT