I had a friend with a RAM that was doing the same thing. I believe this is
what the replaced to fix his.
-----Original Message-----
From: Jetmugg@aol.com <Jetmugg@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Monday, September 20, 1999 12:05 PM
Subject: Re: DML: Oil Pressure Gauge fluctuating
>
>
>The most probable cause is a bad sending unit. The sender is mounted on
the
>top of the block, near the thermostat housing. The temp. sensor is also in
>this area, so be sure that you know which is which before you switch them
out.
>
>SteveM.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:56 EDT