In a message dated 9/21/99 6:53:07 PM Eastern Daylight Time,
gary.shook@wcom.com writes:
<< But do you have a boost gauge? If so, I'd be curious to know
what the boost is at different RPMs... like what is it @ 2500 & every 500
RPM after? I know the Kenne Bell is supposed to be almost linear.. (i.e.
nearly constant 6PSI from 1500 RPM on up) >>
Peak is 6lbs @ 4800rpm. 4lbs @ 3800rpm. 3lbs @ 3000rpm. These are all
approximate numbers.
When I leave the line @ 2000 rpm, it takes maybe a few tenths of a second for
the truck to wake up and go. I leave the line @ ~2 lbs of boost. Not much,
but any more would probably break the tires loose. Once it hits ~3500 rpm or
so, it really starts to scream (due to the cam I run), and in 1st, the tires
usually break loose under boost... that is if they weren't already spinning.
:-)
ttyl
Patrick
http://surf.to/rdperformance
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:01 EDT