Re: JBA Header INSTALL help...

From: Aaron (acolona@i-55.com)
Date: Thu Oct 14 1999 - 18:20:45 EDT


I just installed those a month ago on my 99 5.2 4x2. the passenger side was
a little aggravating, but the driver's side one went on with no problems.

----- Original Message -----
From: <jbe@micron.net>
To: DML <dakota-truck@buffnet.net>
Sent: Thursday, October 14, 1999 1:27 PM
Subject: DML: JBA Header INSTALL help...

> I have a set of headers made by JBA for Gibson that I am trying
> to install on my '99 DAK 318 4x4 auto. JBA claims they will fit
> no problem. However Gibson says they will only fit the
> '97 to '98 Dak with 318 or 360.
>
> My problem is that on the drivers side the header hits the brake
> booster and thus will not mount to the block. Does anyone
> know if Dodge changed the location of the brake booster in
> '99 such that these headers won't fit now?
>
> Any help here would be appreciated.
>
> Ja
>
> Email me privately to save bandwidth
> p.s. the headers were model number GP945S at gibson
> and 1945S at JBA
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:56 EDT