Re: spring clamps anyone?

From: Richard A Pyburn (rap777@juno.com)
Date: Tue Oct 19 1999 - 13:46:50 EDT


Sounds good to me. I'll take a set.
Richard in San Antonio

On Mon, 18 Oct 1999 23:47:18 -0400 "Jon Smith" <fast4x4@bellsouth.net>
writes:
>Aight, here's the deal, went to get some steel to make some spring
>clamps
>today (to kill my wheel-hop) bad part is the company has a $25min
>charge.
>So before I hit the scrap yard to get 16" of the stock, I figgured I'd
>see
>how much interest I can stir up on the DML. The material is $0.75 per
>foot,
>and since 16" is required for each application, my math (which isn't
>exactley good) brings the grand total to $1.00 per truck.
>
>So here's the offer, I'll buy the stock, cut and drill as needed and
>include
>neccesary hardware if there is sufficient interest. Total costs will
>be
>split up umong those interested, I'm not out to make any profit, just
>gotta
>get more traction before I break into the 14's on the 29th.... (knock
>on
>wood)
>____________________________________________
>Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
>'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
>dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
>MSD 8.5's, self-moded intake, 180 degree thermo,
>ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
>BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
>207.2 RWHP, 276.2 RW ft/lbs
>ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:05 EDT