Aight, here's the deal, went to get some steel to make some spring clamps
today (to kill my wheel-hop) bad part is the company has a $25min charge.
So before I hit the scrap yard to get 16" of the stock, I figgured I'd see
how much interest I can stir up on the DML. The material is $0.75 per foot,
and since 16" is required for each application, my math (which isn't
exactley good) brings the grand total to $1.00 per truck.
So here's the offer, I'll buy the stock, cut and drill as needed and include
neccesary hardware if there is sufficient interest. Total costs will be
split up umong those interested, I'm not out to make any profit, just gotta
get more traction before I break into the 14's on the 29th.... (knock on
wood)
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:05 EDT