Re: dakota body lift and suspension CORRECTION

From: Peter L Anthony (panthony@pcn.com)
Date: Thu Oct 21 1999 - 17:47:28 EDT


Check with Summit, They are an authorized dealer and can special order any
wheel you want.

Peter L Anthony
PCN Inc.
Network Engineer
Voice 973-290-5508
Fax 973-490-3107
----- Original Message -----
From: <brian.duffey@intelsat.int>
To: <dakota-truck@BUFFNET.NET>
Sent: Thursday, October 21, 1999 4:02 PM
Subject: RE: DML: dakota body lift and suspension CORRECTION

> Nice Wheels, even have a FEW with our bolt pattern.
>
> But now a little venting... How the hell do companies stay in business?
> If you can't get your product out to the marketplace, and you won't sell
> direct to the consumer, just how the F*** are we suppose to buy your
> product?*!?
>
> I just called their distribution center in N.C., nearest to me (in Va.)
> They couldn't give me any dealers names (in the whole friggin state?!)
> They could only remember that "I think we've shipped some wheels to Va.
> once."
> And they won't sell to you direct from their distribution center.
>
> If I'm going to give someone my hard earned $$$'s, I'm sure as hell not
> going to bend over backwards to do it! H*LL, they should be bending
> backwards to make it easier for us!
>
> O.K., Satan hat is off... thanks for the venting. Time to write an e-mail
to
> the "Corporate" HQ. Dumb Asses!
>
> Duff
> '95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
> MSD 6AL - MSD Blaster Coil
> MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
>
>
>
> -----Original Message-----
> From: Peter L Anthony [mailto:panthony@pcn.com]
> Sent: Thursday, October 21, 1999 2:06 PM
> To: dakota-truck@BUFFNET.NET
> Subject: Re: DML: dakota body lift and suspension CORRECTION
>
>
> Check out American Eagle http://www.americaneaglewheels.com
>
>
> Peter L Anthony
> PCN Inc.
> Network Engineer
> Voice 973-290-5508
> Fax 973-490-3107
> ----- Original Message -----
> From: Terri Pryer <dzoo@arn.net>
> To: <dakota-truck@buffnet.net>
> Sent: Thursday, October 21, 1999 3:45 PM
> Subject: Re: DML: dakota body lift and suspension CORRECTION
>
>
> > If you talk to centerline they can custom build your wheels for you in
any
> > style they offer. Not sure how much tho. Think it is for like 20
dollars
> > extra on top of the price of the wheels.
> > Mark
> > -----Original Message-----
> > From: GrnDak4x4@aol.com <GrnDak4x4@aol.com>
> > To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> > Date: Wednesday, October 20, 1999 12:39 PM
> > Subject: Re: DML: dakota body lift and suspension CORRECTION
> >
> >
> > >In a message dated 10/20/99 12:42:29 PM Central Daylight Time,
> > >brian.duffey@intelsat.int writes:
> > ><< O.K.
> > > So now that we have all that settled, What Wheels are you going to
use?
> > > What wheels have the trucks that you've looked at used?
> > > I was leaning towards the Mickey Thompson wheels (very heavy duty) but
> > they
> > > only list one wheel in our bolt pattern (6 on 4.5 inch), and that one
> has
> > > the 4.5 inch backspace.
> > > Getting the lift, etc. done seems to be the easy part. Finding decent
HD
> > > wheels with all the right dimensions is the big pain in the ass of the
> > whole
> > > project.
> > > >>
> > >Of course, you also need to consider how wide of tire you plan to run
and
> > >what width rim is required for that size tire. I suggest go to any
> tire/rim
> > >dealer and tell them what you are looking for, and trust me, if they
want
> > >your money they will find you rims for your truck with the specs you
want
> > and
> > >need!!!! However, I havent really looked at rims. TrailMaster did send
me
> a
> > >list of rims however. Here it is:
> > >SunDel Wheel Co; 110 Sprinter(PN#110-0-57645)
> > > -15x7 with 6-4.5 Bolt Pattern
> > > -3.58" Backspacing
> > >Ultra Custom Wheels; Type 49(PN#49-5886)
> > > -15x8 with 6-4.5 Bolt Pattern
> > > -3.75" Backspacing
> > >Ultra Custom Wheels; Type 64
> > > -15x8(PN#64-5886P); 3.5" Backspacing
> > > -15x10(PN#64-5186P); 3.5" Backspacing
> > > -15x12(PN#64-5286P); 3.5" Backspacing
> > >Weld Racing
> > > -VR-11; 5 Spoke Knuckle(PN#11-58666L,R); 15x8 with 3.5" Backspacing
> > > -VR-12; Cyclone(PN#12-58666L,R); 15x8 with 3.5" Backspacing
> > > -VR-27; 5 Spoke Tomahawk(PN#27-58666L,R); 15x8 with 3.5"
Backspacing
> > >Billet Specialties also carried them in all of their Premier Series.
> > >Hope this helps!!!!!!!!!
> > >Kyle
> > >93 Dakota 4x4 V6
> > >
> > >
> >



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:11 EDT