There's some good info here: www.crower.com
Jason
>Now that my dak is pulling harder and higher in the upper rpm band (I'm
>shifting at 5200 - 5500) I'm starting to worry about the valvetrain. I'm
>thinking I should upgrade to some good roller rockers, maybe stiffer
springs
>and some hardened push rods. But I don't really know where to start. When
>you do roller rockers do you change anything else (springs or rods)? I
want
>to make things as safe and reliable as possible for higher revs. So what
>should I do?
>
>Thanks,
>---Mike, near Houston.--- http://www.mikesdakota.com
>'93 V8 4X2
>Houston Area DML Meet Page
>http://www.geocities.com/motorcity/downs/9221
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:15 EDT