Re: Re: Magnum Intake manifold...More than 1 way to mod??

From: Mark Kuzia (flyboy01@worldnet.att.net)
Date: Tue Oct 26 1999 - 01:13:04 EDT


Ive got picture of his manifold before and after, go to
http://home.att.net/~flyboy01/360Dakota.html

Mark Kuzia
95 Dak 5.9L, 5-spd, 4.10-SG
13.790 @ 99.42 mph
99 Dak 5.2L, 5-spd, 3.92-SG
14.896 @ 91.08 mph (2.072 60 ft)
flyboy01@worldnet.att.net
http://home.att.net/~flyboy01/360Dakota.html

-----Original Message-----
From: Jon Smith <fast4x4@bellsouth.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Monday, October 25, 1999 10:27 PM
Subject: DML: Re: Magnum Intake manifold...More than 1 way to mod??

Did you get those emails that Eric Kurtz sent out?? I'm looking for a
junkyard manifold to spend some time working over, just so I can take time
with it and still have a dak to drive
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: GS- <GSWillhite@ualr.edu>
To: <dakota-truck@buffnet.net>
Sent: Monday, October 25, 1999 3:57 PM
Subject: DML: Magnum Intake manifold...More than 1 way to mod??

> I know that more than one person has looked at the
> Magnum manifold and noticed a similarity to a tuned
> port manifold. The intake runners go STRAIGHT UP to
> the TB opening. The big difference in the two manifolds
> are the TB on the tuned port is near the front of the
> intake. I have been curious about modifing the manifold
> by boxing in the runners at the top where they meet with
> the TB opening. Picture the air going thru the TB into
> the boxed in area where the air is distributed to the
> 8 runners. The air would be INHALED AT THE TOP OF THE
> MANIFOLD instead of at the bottom. Hope this makes some
> scense. This would leave the large plenum area underneath
> the runners without vacuum, but the TB would distribute air
> much more evenly than say a chebbies tuned intake port,
> because the Throttle body opening is in the middle on top of
> the beer barrel and not the end. Probably to much of a mod
> to be a reality tho? I haven't seen a magnum manifold on the
> inside except in pictures. I thought I would post this to see
> if anyone has had the same fictional visions. Might provide a
> good laugh for others tho. =)
>
> GS -
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:19 EDT