On Tue, 2 Nov 1999 DRD892@aol.com wrote:
> Morning Jon,
>
> No, you cannot pull the codes with the Hypertech connected.
> The scanner will not communicate. I tried this :))
Bummer. :-) Yeah, I figured you would have, but I thought I'd
ask just in case. :-) Does the key on/off method work? Seems like
if you have to remove the hypertech to clear the codes, you have to
disconnect the power first, which will erase the codes. If the
hypertech goes between the wiring harness and the computer, then
even if you don't disconnect the power, it'll still cut power from
the PCM when the connectors are unplugged... Sounds like a
frustrating little catch 22. :-)
-Jon-
.--- stei0302@cs.fredonia.edu ----------------------------------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '96 Dodge Dakota V8, '96 Suzuki Intruder 1400, '96 Kolb FireFly 447 |
`--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:02 EDT