Drop in yes, but you do need to remove two of the main cap bolts and install
new........
> -----Original Message-----
> From: nosdakota [SMTP:nosdakota@email.msn.com]
> Sent: Friday, November 05, 1999 5:03 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: '97+ 318 Windage Tray
>
> I would expect that it is a drop in but I can't say for sure. I was
> looking
> at it as well. If you find any info please pass it along.
> Joe W.
> 87 Shelby Charger 13.9
> 98 Dakota 13.1
> ----- Original Message -----
> From: Bob Tom <tigers@bserv.com>
> To: <dakota-truck@buffnet.net>
> Sent: Friday, November 05, 1999 7:38 AM
> Subject: DML: '97+ 318 Windage Tray
>
>
> > Does anyone know if the windage tray kit, PN4529790,
> > will fit the '97 318? If so, and if someone has done the
> > install, is it a straight drop the pan and bolt in or is
> > it more involved than this? Any info. is much appreciated.
> > Thanks.
> >
> > Bob. Southern Ontario, Canada.
> > '97 Dakota CC Sport, FR, 5.2L, 3.55 SG, auto.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:07 EDT