While we're at it does anyone know if they make a crank scraper as well?
I've heard the combo of windage tray and scraper was worth 10-15 hp
Joe W.
87 Shelby Charger 13.9
98 Dakota 13.1
----- Original Message -----
From: JHarmon <jdharmon@earthlink.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, November 06, 1999 1:17 AM
Subject: Re: DML: Re: '97+ 318 Windage Tray
> You are correct with the part number. The install is a bit more tricky.
If
> the pan is less than 2 inches from the top of the cross member, you will
have
> to loosen the motor mounts and raise the engine slightly to get the pan
out.
> Crank gets in the way!!!
>
> We did it on the DACUDA and it made a small difference, 4 hp rear wheels.
>
> Jim
>
> nosdakota wrote:
>
> > I would expect that it is a drop in but I can't say for sure. I was
looking
> > at it as well. If you find any info please pass it along.
> > Joe W.
> > 87 Shelby Charger 13.9
> > 98 Dakota 13.1
> > ----- Original Message -----
> > From: Bob Tom <tigers@bserv.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Friday, November 05, 1999 7:38 AM
> > Subject: DML: '97+ 318 Windage Tray
> >
> > > Does anyone know if the windage tray kit, PN4529790,
> > > will fit the '97 318? If so, and if someone has done the
> > > install, is it a straight drop the pan and bolt in or is
> > > it more involved than this? Any info. is much appreciated.
> > > Thanks.
> > >
> > > Bob. Southern Ontario, Canada.
> > > '97 Dakota CC Sport, FR, 5.2L, 3.55 SG, auto.
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:07 EDT