Travis,
A shop out here made custom boxes for me. If your interested I am sure they
can make you a custom setup. It was around $400 for 2 custom boxes and a
crossfire 300 watt amp. I already had the speakers, so you would have to add
the cost of that in. Let me know if your interested.
Steven 2me
http://www.smokindakota.com
AOL IM = SmknDakTrk
ICQ = 42763370
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Travis Gray
Sent: Wednesday, November 17, 1999 5:10 PM
To: dakota-truck@buffnet.net
Subject: DML: SUBS in a Regular Cab!!!
I want to put a sub behind each seat in my regular cab. I went to the JL
Audion Site and
they sell premade boxes for compact trucks like mine.
http://www.jlaudio.com/enclosures/prowedge/index.html
Anyways i measured and it looks like it would fit accept for the depth. I
want my seat to
maintain full range of motion and it comes up a little less that an inch and
a half to
short. I noticed when measuring that the back wall of the truck (just under
the window)
isn't flat. It has to humps on each side of the middle "seat". The hump is
about half an
inch out. My question is can that back covering with the hump be replaced
with a flat
piece or is there stuff behind it that would prevent a flat piece from
working? Also what
is behind there is there anything or just the metal of the cab? Any
suggestions, comments
about anything would be greatly appreciated. Also is there anything i am
forgeting to
account for i think i got it all. If someone could take their own
measurments and tell me
what they got i would appreciate it. Lastly, does anyone know of any other
companies who
sell premade boxes that would fit the dak rc.
--Travis
P.S. Even if i could remove the humps i think that the box still wouldnt
fit. I think i
could sacrafice an inch in seat movement if i HAD to. Please send ANY
suggestions.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:17 EDT