JON, hee hee, I meant CAN'T heee heee, that would be pretty hard to
beat, down right impossible!! wow, two sets each!! she ain't going no
where with two sets!!
Did you put both infront of the axle?? or one on each side???
Matt
-----Original Message-----
From: Jon Smith [mailto:fast4x4@bellsouth.net]
Sent: Monday, November 22, 1999 11:49 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: RE: spring clamps anyone?
yep, everyone I sent them to got 4 sets of clamps, 2 per spring.. BTW, you
CANNOT beat that with a nine iron.. already tried =)
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Barret, Matt <MATT_BARRET@earthtech.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, November 22, 1999 11:18 AM
Subject: DML: RE: Re: RE: spring clamps anyone?
> I read an article somewhere, and they recommended two sets of clamps( 2 on
> each side) anybody tried that??? that's great 9 bucks!! can beat that
with
> a nine iron.
> Matt
>
> -----Original Message-----
> From: Jon Smith [mailto:fast4x4@bellsouth.net]
> Sent: Monday, November 22, 1999 10:58 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: spring clamps anyone?
>
>
> I made up several sets and sent them out, only to package them wrong and
our
> wonderful postal system lost a few... Maybe if there is interest enough,
> I'll make up a couple more sets, I have enough stock left over for
probably
> 2-3, maybe 4 sets. Total cost was $9.25, that was for materials, packing
> and postage I spent $8 on grade 8 mounting hardware which still came out
> less than 1/2 the cost of the Summit spring clamps.
>
> They didn't do a whole lot for traction, but totally killed ALL wheelhop,
> which is what they're designed for anyhow....
>
> So who else is interested??
> ____________________________________________
> Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:21 EDT