2 pair per side, all in front of the axle
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Barret, Matt <MATT_BARRET@earthtech.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, November 22, 1999 12:25 PM
Subject: DML: RE: Re: RE: Re: RE: spring clamps anyone?
> JON, hee hee, I meant CAN'T heee heee, that would be pretty hard to
> beat, down right impossible!! wow, two sets each!! she ain't going no
> where with two sets!!
> Did you put both infront of the axle?? or one on each side???
> Matt
> -----Original Message-----
> From: Jon Smith [mailto:fast4x4@bellsouth.net]
> Sent: Monday, November 22, 1999 11:49 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: Re: RE: spring clamps anyone?
>
>
> yep, everyone I sent them to got 4 sets of clamps, 2 per spring.. BTW,
you
> CANNOT beat that with a nine iron.. already tried =)
> ____________________________________________
> Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
> '95 318 auto CC 4x4: Accel Supercoil, JBA headers,
> dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
> MSD 8.5's, self-moded intake, 180 degree thermo,
> ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
> BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
> 207.2 RWHP, 276.2 RW ft/lbs
> ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> ----- Original Message -----
> From: Barret, Matt <MATT_BARRET@earthtech.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, November 22, 1999 11:18 AM
> Subject: DML: RE: Re: RE: spring clamps anyone?
>
>
> > I read an article somewhere, and they recommended two sets of clamps( 2
on
> > each side) anybody tried that??? that's great 9 bucks!! can beat that
> with
> > a nine iron.
> > Matt
> >
> > -----Original Message-----
> > From: Jon Smith [mailto:fast4x4@bellsouth.net]
> > Sent: Monday, November 22, 1999 10:58 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Re: RE: spring clamps anyone?
> >
> >
> > I made up several sets and sent them out, only to package them wrong and
> our
> > wonderful postal system lost a few... Maybe if there is interest
enough,
> > I'll make up a couple more sets, I have enough stock left over for
> probably
> > 2-3, maybe 4 sets. Total cost was $9.25, that was for materials,
packing
> > and postage I spent $8 on grade 8 mounting hardware which still came out
> > less than 1/2 the cost of the Summit spring clamps.
> >
> > They didn't do a whole lot for traction, but totally killed ALL
wheelhop,
> > which is what they're designed for anyhow....
> >
> > So who else is interested??
> > ____________________________________________
> > Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:21 EDT