In a message dated 11/30/99 5:17:51 PM Eastern Standard Time,
tigers@bserv.com writes:
<< Anyone with a '92 Dakota, V6, auto. know the torque specs for the
torque converter bolts? TIA. >>
Bob
I have a 93 Service manual which would probably be the same but it is not
that easy to figure out. There are 4 different settings base on the size of
the TC and the number of Lugs. Each one requires a different lenght bolt
also.
They show the following:
9.5 3 lug converter = .46 in bolts and 40 ft lbs torque
9.5 4 lug converter = .52 in bolts and 55 ft lbs torque
10.0 4 lug = .52 bolt and 55 torque
10.75 4 lug = .44 bolt and 270 inch lbs torque
Hope this helps
Bill
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:40 EDT