Kevin, Put both pair of Clamps forward of the axle, space them before and
aft the factory clamp!
Also, I have the Lakewood traction bars and they work best as far forward as
you can get them, the snubber should be in the front most hole, and that
snubber should hit just shy of the front spring eye, ideally you want it to
hit under the spring eye, because it will not give any, but if its close
enough you will not get any deflection in the spring!
Matt
__________________________________
Matt -- Mechanicsville, VA
`00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD RC 2x4
Homemade K&N open element, Traction Bars,
Spring clamps, ... BEST 1/4 14.871 @ 91.01 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
-----Original Message-----
From: Quiktruk99@aol.com [mailto:Quiktruk99@aol.com]
Sent: Sunday, December 05, 1999 9:01 PM
To: dakota-truck@buffnet.net
Subject: DML: Spring clamps ?'s
I'm putting my Lakewood traction bars on this week, and bought 2 pairs of
Mr.
Gasket spring clamps, as the guy at Summit said my 99 called for 'em. I have
a dumb question: How far back should I put the spring clamps? Should I clamp
the spring pack where it spreads at the rear? Or should the clamp be closer
to the traction bar? BTW, the part # is 1293 for the clamp pkg., which has 2
plates & 2 bolts, cost only $11.34 each from Summit. I'm assuming they clamp
the rear where it's spreaded, just want to hear someone else agree.
Kevin / NJ
99 Black Sport+ CC(no decals) / 318 auto 2wd / 3:92 SG
OEM wheel flares / 1.5"& 2" drop / Dunlop GT Qualifiers
F&B Stage1 / MSD 6a(plugs@.050") / Mallory 8mm Prowires / Echlin cap & rotor
K & N Gen II FIPK / 180 HD t-stat / Flex-a-lite dual 12" fans( spring of
'00)
JC Whitney split-rear exit cat-back / Hooker tips / Lakewood traction bars
Pace Edwards Roll-Top / Bedrug / Pop Lock
African rosewood interior kit / Wet Okole seat covers
Kenwood 140w stereo w/6 cd changer / silver DML stickers
visit my truck at: <A
HREF="http://members.aol.com/quiktruk99/DARKDODGE.html">
THE DARK DODGE</A>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:48 EST