In a message dated 12/25/1999 8:40:10 AM !!!First Boot!!!, grndak4x4@home.com
writes:
<< Rob,
Just curious, but how/why would this happen? There is only 1 tranny mount
right? >>
Yeah normally. there is one and its close to the tail of the tranny. Usually
it happens because of the twisting of the motor. i would also check the motor
mounts just to be safe. If you have a oil leak and it gets on the rubber
than the oil softens the rubber and it braeks it. Mostly the tranny mount
breaks because the motor mount is broken and its allowing the motor to shift
as you press the gas. usually the motor mount that breaks is the one that
the motor wants to pull away ( twist away)from. hope this helps
Rob
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:03 EST