Dan,
Thank-you, thank-you, thank-you!!!
I'll be anxiously awaiting. In the mean time, I'll be removing my timing
cover and cam.
Rich
> ----------
> From: Daniel Colucci[SMTP:djcolucci@worldnet.att.net]
> Reply To: dakota-truck@buffnet.net
> Sent: Wednesday, December 29, 1999 11:06 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Mopar Roller Rocker Install Questions
>
> I believe these are the same rockers as Crane. I have installed Cranes on
> my truck and will see if Ihave the instructions still. The two set nuts
> are
> used to install the studs into the head. You have to torque them down
> with
> the set nut still on.
>
> I will check and get back to you on the instructions tonight maybe.
>
> Dan
> -----------------------------------------------------
> Click here for Free Video!!
> http://www.gohip.com/freevideo/
>
> ----- Original Message -----
> From: Wisotzkey, Rich <Rich.Wisotzkey@gd-wts.com>
> To: <dakota-truck@buffnet.net>
> Sent: Wednesday, December 29, 1999 4:44 PM
> Subject: DML: Mopar Roller Rocker Install Questions
>
>
> > I need help from anyone who has installed the Mopar roller rockers. My
> set
> > does not have any instructions with them. How do you put the pieces
> > together? It looks like the studs hold down some sort of little guide
> fork
> > that fits into a c-channel that bolts to the head. Above this, there
> > appears to be a nut you tighten down on the rocker with a set screw. I
> > assume there is a preload for this, but again there is nothing to tell
> me
> > how to set them. Also, there is a little bag with 16 phenolic pieces
> and
> > two other nuts together. I can only guess the phenolic parts go around
> the
> > pushrods somewhere. Where do these go, and what about these two nuts?
> > Like I said, there were no instructions. I called Koller, but they
> didn't
> > have a clue how to install them. I also tried calling Mopar tech line,
> but
> > can't get through to them either. Can someone please help me out with
> some
> > guidance? If someone has an instruction sheet that came with their
> rockers,
> > a fax would be super. Thanks.
> > Rich - Ashburn, VA
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:08 EST