Yeah, color copies are a bit more expensive. They usually run around 97
cents per page, but I can get them cheaper. Let me know what you want to do.
Steven 2me
http://www.smokindakota.com
AOL IM = SmknDakTrk
ICQ = 42763370
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of GS-
Sent: Thursday, January 13, 2000 10:58 AM
To: dakota-truck@buffnet.net
Subject: Re: DML Cards was: DML: license plates
Thanks Steven, I'll try a printer here and if it doesn't work
out, I may have to send you an e-mail. 10,000 is a heck of a
lot :) doubt if I could use them all. Not a bad offer except,
I would want you to cut them. Color may be in order as I would
want to grab their attention and depending on cost it might be
more practical to go B&W.
Thanks again
GS -
SmokinDakota wrote:
>
> Well if you don't want them to fancy, i.e. just black and white. I can do
> them for real cheap. I figure you can fit 10 on a sheet of card stock. To
> copy that in black in white it would cost around 4 cents if you order more
> than 1000 copies. So thats 1000 copies 10 up on a sheet = 10,000 cards for
> $40. However, if you want us to cut it there is an additional charge. If
> anyone needs copy work check out my works website www.alternativecopy.com.
>
> Steven 2me
> http://www.smokindakota.com
> AOL IM = SmknDakTrk
> ICQ = 42763370
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:45 EDT