John,
You might need the relay in the underhood fuse box too.
Roger
'98 SLT CC 4X4 Light Driftwood 5.2 3.55 Auto
Pioneer DEH-P86DHR, Champion Truck Plugs, MSD Super Conductors,
Pilot Fog Lights
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Alex Ross
> Sent: Saturday, January 15, 2000 3:38 PM
> To: dakota-truck@buffnet.net
> Subject: DML: RE: **FOG LIGHTS**
>
>
> Unfortunately it is molded in there. You will need a 4" hole saw to cut it
> out. You can buy the whole kit from the dealer for around $150. Pop your
> dash cover off (the black piece) and look where the switch is supposed to
> go. If you see a wiring harness back in there, your truck is already
> pre-wired and all you will need is the lights and the switch. My truck
> wasn't and wiring it up was a bitch.
>
> Alex
> 97 CC Sport V8 5spd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]
> On Behalf Of John McIntyre
> Sent: Saturday, January 15, 2000 2:23 PM
> To: dakota-truck@buffnet.net
> Subject: DML: **FOG LIGHTS**
>
> I bought my Dak used, and there wasn't any fog lights. My question is, the
> space where they should go, is that moulded or is it a cap in
> there to cover
> the hole? I haven't really looked but i was just thinking about it today,
> maybe putting some in later.
>
> thanks
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:48 EDT