Russ I had my truck checked on Wed. this week to see what the front diff.
was. It is a Dana 35C gears+carrier.I'm running 33X12.5 now with 3" body
lift,I'm also going to add TC lift and change the gears to either 4.56 or
4.10 not sure yet. I also am going with 35" tires,but this set-up requires
rims with less back spacing than factory 8" rims have,unless your only going
to drive on-road. The problem is when you have the wheel turned and the
suspention compresses the tire will hit the frame at the front.
-----Original Message-----
From: Dkota4by4@aol.com <Dkota4by4@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Thursday, January 20, 2000 9:37 PM
Subject: DML: Gear/Tire help
>I am looking for prices on 4.10 gears for a 97 (Front and Rear). I know we
>have a 8.25 rear...but what size front do we have? Also, anyone know who
has
>the best prices on these gears? I figure after I go with the 35x12.5 BFG
>M/Ts I will need the 4.10 to be able to move again. The cheapest I have
>found the BFGs is 150/tire from 4 Wheel Parts...anyone know where I can get
>them cheaper? I tried on base (military) and they want 170/per and they
>won't mount them or balance anything over 33s. Thanks for the help.
>
>Russ
>97 5.2 CC 4x4 SLT+ with all the goodies Infinity Am/Fm/Cass/Cd
>Rhino Roll Top Clear Corners Python 3000 3" body lift
>BFG 32x11.5x15 Mud Terrains Jet stage II F&B Throttle Body 14x3
>FABM Gibson dual catback Champion Truck plugs dual air horns
Cobra
>75 WX Towing Package All decals (except V8) removed
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:58 EDT